manualshive.com logo in svg

Digitus DN-80233, User Manual

Share
Download
Digitus DN-80233 User Manual Download Page 161

 

160

the same administrative mode setting.   

Default  

enabled  

Format  

port-channel linktrap {<logical unit/slot/port> | all}   

Mode  

Global Config   

 

7.21.5.1 no port-channel linktrap 

 

This command disables link trap notifications for the port-channel (LAG). The interface is a 
logical unit, slot and port slot and port for a configured port-channel. The option 

all 

sets every 

configured port-channel with the same administrative mode setting.   

Format  

no port-channel linktrap {<logical unit/slot/port> | all}   

Mode  

GlobalConfig  

 

7.21.6 port-channel name   

 

This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port 
for a configured port-channel, and name is an alphanumeric string up to 15 characters. This 
command is used to modify the name that was associated with the port-channel when it was 
created.  

Format  

port-channel name {<logical unit/slot/port> | all | <name>}   

Mode  

Global Config   

 

7.21.7 show port-channel brief   

 

This command displays the static capability of all port-channels (LAGs) on the device as well 
as a summary of individual port-channels.   

Format  

show port-channel brief   

Mode  

Privileged EXEC and User EXEC   

Static Capability   

This field displays whether or not the device has static capability enabled.   

For each port-channel the following information is displayed: 

 

Name 

This field displays the name of the port-channel. 

Link State   

This field indicates whether the link is up or down. 

Mbr Ports   

This field lists the ports that are members of this port-channel, in <unit/slot/port> 

notation. 

 

Active Ports   

This field lists the ports that are actively participating in this port-channel. 

Summary of Contents for DN-80233




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands