Chapter 12 Description of Parameter Settings
MS300
(High Speed Model)
12-06-20
Ambient temperature derating curve for general control
PT100 Voltage Level 1
Factory Setting: 5.000
Settings 0.000~10.000 V
PT100 Voltage Level 2
Factory Setting: 7.000
Settings 0.000~10.000 V
Condition settings: Pr. 06-57 > Pr. 06-56.
PT100 Level 1 Frequency Protection
Factory Setting: 0.0
Settings 0.0~1500.0 Hz
Delay Time of Activating PT100 Level 1 Frequency Protection
Factory Setting: 60
Settings 0~6000 sec.
PT100 operation instructions
(1)
Use voltage type analog input (AVI, ACI voltage 0
~
10V) and select PT100 mode.
(2)
User can select one of voltage type analog input below:
(a) Pr. 03-00 =11, (b) Pr. 03-01 = 11 and Pr. 03-29 = 1
(3)
When selecting Pr. 03-01 = 11 and Pr. 03-29 = 1, must switch AFM to 0
~
10V.
(4)
AFM outputs constant voltage or current, Pr. 03-20 = 23. Must switch ACM to 0-20 mA, and
set AFM output level to 45% (Pr. 03-32 = 45%) of 20 mA = 9 mA.
(5)
Pr. 03-32 is for adjusting the constant voltage or constant current of AFM output, the setting
range is 0~100.00 %.
(6)
There are two types of action level for PT100. The diagram of PT100 protecting action is
shown below:
Summary of Contents for VFD11AMS21AFSHA
