Delta VFD11AMS21AFSHA, User Manual

Page: 201 / 445

Chapter 12 Description of Parameter Settings

MS300
(High Speed Model)
12-02-19
 For Example:
If the value of Pr. 02-53 displays 0003h (hex), it means RY is used by PLC.
Weights
Bit
Relay
Displayed value
Reserved
Reserved
MO1
MO2
0=Not used by PLC
1=Used by PLC
Display Memory of Frequency Command Used by External Terminal
Factory Setting: Read only
Settings Read only
 When the source of frequency command set as external terminal, if Lv or Fault occurs at this time,
the frequency command of external terminal will be saved in this parameter.

EF Active when Terminal Count Value Attained
Factory setting: 0
Settings 0: Terminal count value attained, no EF display (Continue to operate)
1: Terminal count value attained, EF active

Initial Frequency Command (F) Mode after Stop
Factory setting: 0
Settings 0: By current freq. command
1: By zero freq. command
2: Refer to Pr. 02-83 to set up

Initial Frequency Command (F) Setting after Stop
Factory setting: 600.0
Settings 0.0~1500.0 Hz