XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
64
The following menu displays once the System Setup password is entered:
Main Menu
→
Setup
TC Reader Offset
Sets the timecode reader offset. This must be set for playing Soundtrack
and CSS content to properly synchronize the content to the film.
Audio
Sets test audio levels, plays audio test files and enables/disables language
selection. The
Language Versions
should be enabled in areas where
different languages should be played. The audio levels and test files are
used to set audio for either soundtrack or video with audio.
Video
Sets the parameters for the Video projector. This menu is available only
with the HD Video Option.
CSS
Sets the parameters for the projected CSS subtitles or captions. There are
no configurable items for narration and Rear Window™ in this menu.
This menu is available only with a valid CSS license.
Automation
Contains the following configuration items:
1)
Format automation pin
definitions and operating modes, 2) Define functions for general purpose
input and output control pins, 3) Configure Video Playlist Automation
parameters, 4) Test format automation signals and I/O control signals.
System
Contains menus for the following system operations: 1) Assign functions
to the 4 “soft key” buttons below the LCD, 2) USB memory device
operations to save or restore configurations, or save log files, 3) Configure
COM1 for use by the Video Projector or CSS Rear Window™, 4) Set the
setup menu password, 5) Set system network parameters, 6) View or
redefine the amount of reserved disc space for Film and Preshow content,
7) Set XD20 time and date, 8) Set the LCD contrast and brightness, 9)
Identify drive A and drive B on the external DR-1 drive unit, 10) Check on
the status of the RAID, 11) Revert to an earlier XD20 software version.
Display Language
Change the language used on the XD20 LCD display screen to one of the
following: English, French, German, Italian, or Spanish.
