manualshive.com logo in svg

Datasat XD20, Installation And Operating Manual, Page: 125 / 254

Share
Download
Datasat XD20 Installation And Operating Manual Download Page 125

 

XD20 Installation and Operating Guide 

 Version 1.1

 

 

 

Document # 9301H264001.1 

111

The Raid Details screen looks like this example. 

 

Raid Details 

 

Refresh 

Refresh (update) the information on this screen. 

Enter

 or 

◄

 

Return to Raid Status screen. 

 

7.14. Software Revert 

The Revert operation allows the XD20 you are using to revert back to the previous version of XD20 
software. It will only allow one step back (It will not revert back further than the previous version).  

 

Note

:  If the XD20 has been updated using a full install disc, it will not revert to a previous 

version.  

Start by accessing the System Options menu. From the Main menu, select 

Setup

 

→

 

System

 

→

 

Revert

, as 

shown below. Scroll to 

Revert

 and press 

Enter

. 

 

After you select 

Revert

, the following menu will appear, asking for confirmation.  

 

Setup 

→

 System 

→

 Revert 

 

No

   

System will continue to use current version of software   

Yes

 

System will revert to previous version of software installed in the unit 

Exit Menus

 

Return to Status display. 

If you select 

No

, the following message will appear on the screen and the software will not revert to a 

previous version.  

 

 

Enter 

 

Return to the System Options menu. 

 

If you select 

Yes

, the message shown below will appear on the screen.  

 

 

Enter

 

Activate the software revert. 

 

When the Revert process is completed, the 

Ready

 message will appear on the XD20. This indicates the 

unit is ready for loading, playback or setup. 

 

 

Summary of Contents for XD20































































































































































































































































Reviews:

No comments