manualshive.com logo in svg

Datasat XD20, Installation And Operating Manual, Page: 124 / 254

Share
Download
Datasat XD20 Installation And Operating Manual Download Page 124

 

XD20 Installation and Operating Guide 

 Version 1.1

 

 

 

Document # 9301H264001.1 

110

 

7.11. LCD Setup 

Use the LCD Setup screen to adjust brightness and contrast of the LCD display. Use the buttons below 
the LCD display to make changes, and then press 

Enter

 when finished. 

 

Setup 

→

 System 

→

 LCD Setup 

 

Soft button 1 

Decrease brightness 

Soft button 2 

Increase brightness 

Soft button 3 

Decrease contrast 

Soft button 4 

Increase contrast 

Enter

 or 

◄

 

Return to System menu. 

 

7.12. DVD Drives 

When this screen is displayed, use the buttons below the LCD display to eject the DVD drives on the 
external DVD drive unit.  The purpose is to identify which is drive A and which is drive B. When you 
click identA or identB, the drive tray will eject (open) for a brief time, then close again. 

 

Setup 

→

 System 

→

 DVD Drives 

 

IdentA 

Eject drive A 

IdentB 

Eject drive B 

Enter

 or 

◄

 

Return to System menu. 

 

7.13. RAID 

The Raid Status screen provides status information about the XD20 hard drives. Use the buttons below 
the LCD display to access the 

Details

 screen or to 

Refresh

 the status screen. If one of the drives is 

faulted, an additional button selection is available (

Re-Add

) to attempt to bring the drive back online.  

 

Setup 

→

 System  \

→

 Raid 

 

Details 

Continue to the Details screen. 

Refresh 

Refresh (update) the information on this screen. 

Re-Add 

Bring a faulted drive back online. 

Enter

 or 

◄

 

Return to System menu. 

Summary of Contents for XD20































































































































































































































































Reviews:

No comments