XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
22
2.8.1. Video Projector Settings
The following table lists the video projector settings that are saved by the menu command and restored
for each playlist. Some settings are forced to a certain value on the projector.
Table 8: Video Projector Settings
Option
Value
Comment
BRIGHT
Brightness 000-063
Save/Restore Settings
CONT
Contrast 000-063
Save/Restore Settings
COLOR
Color 000-063
Save/Restore Settings
TINT
Tint 000-063
Save/Restore Settings
SHARP
Sharpness 000-015
Save/Restore Settings
GAMMA
Gamma 000-015
Save/Restore Settings
WBAL-R
White balance, red 000-063
Save/Restore Settings
WBAL-G
White balance, green 000-063
Save/Restore Settings
WBAL-B
White balance, blue 000-063
Save/Restore Settings
COLORTEMP
Color temp 000-003
Save/Restore Settings
FANSPEED
Fan Control Speed
Save/Restore Settings
KEYSTONE
Keystone setting
Save/Restore Settings
CEIL
When ON, image is top/bottom inverted Save/Restore
Settings
REAR
When Rear is ON, image is left/right reversed
Save/Restore Settings
NZRED
noise reduction ON/OFF
Force OFF
PROGV
progressive scan ON/OFF
Force ON
IMAGE
image mode (STAND, REAL, CINEMA, IMAGE1,
IMAGE2, IMAGE3, IMAGE4)
Force STAND
INPUT
Select input 1-3
Save/restore
SOURCE
Select Input source DIGITAL, ANALOG, VIDEO,
SVIDEO, YC, YPBPR, YCBPR, YCBCR, HD-SDI,
SD-SDI
Force Digital
SYSTEM
SYSTEM OF CURRENT INPUT AUTO, NTSC,
NTSC443, PAL, PAL, SECAM, PAL=M, PAL-N,
1080I60, 1080I60, 1035I, 720P, 575P, 480P, 575I,
480I
Force AUTO
SCREEN
NORMAL (4:3), FULL (16:9)
Force Full
TRUE
ON - Select TRUE, OFF - Cancels TRUE
Force ON
DISP
Set/Cancel Display
Force Off - Only on
Projector 1
BBACK
Turn on/off Blue background
Force Off - Only on
Projector 1
LOGO
Turn on/off Logo Display
Force Off - Only on
Projector 1
LAMPMODE
Full or Half
Force Full, only works on
WF-10.
