XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
29
Start/Stop
This enters the ACV control menu that allows you to start/stop the playlist,
or other functions through the soft buttons. When the video is stopped, the
soft button options are Start, Select, and From, as shown below.
Resume video when video is stopped
In order to resume, there must be a valid resume point. There is a valid
resume point if the selected playlist has not completed its play-out and has
been playing for at least 20 seconds before being stopped.
Start
Start the selected ACV Playlist. The display changes after the
start is selected to show the current playback state.
Select
Select a new ACV playlist
From
Start from a designated clip/position.
Resume
This option is available only when it is possible to resume playback
after the playlists stops without finishing the playlist. That would
include playback interruption due to a power failure. The Resume
point would occur slightly before the playback was stopped---within
20 seconds. The button will not be present if the playlist completes,
the playlist has changed, or if the playlist has not played for at least
20 seconds.
When ACV is playing the LCD shows the playlist name, clip name, clip
number, and the last selected CP format. The soft button functions change
to Stop or Skip.
Stop
Stops any video playback
Skip
Skip to the next video clip in the playlist.
