XD20 Installation and Operating Guide
Version 1.1
Document # 9301H264001.1
10
5 When the load process begins XD20 displays information about the content currently being
copied. For example:
Typical load time is three minutes per disc. The following message appears when the load is
complete.
6 Press
Enter
and the disc trays will open. Remove the disc(s) from the tray(s). Press the
“open/close” button to close the tray(s).
7 Repeat steps 1 through 6 for “Disc C” of a three-disc soundtrack.
8 Place the DTS soundtrack discs back in the film canisters for return to the depot.
2.3.2.1. Compatibility with Legacy Soundtrack Discs
Old DTS soundtrack discs did not contain a language ID. If you load an older disc that does NOT contain
a Language ID, and if Language Versions is
enabled
, XD20 will prompt you to identify the playback
language desired. If you are prompted, you must identify the playback language of the disc. If Language
Versions is
disabled
, XD20 will NOT prompt you to identify the language.
If you load a disc and are prompted for the language, you must select the language from the Languages
menu. The only selection you make should match the language listed on the disc label.
See Table 15 on page 89 for a list of available soundtrack languages.
After selecting a language, a confirmation screen will display.
Yes
– Confirm the language is correct and load disc.
No
– Go back to the language menu and make a new selection.
Abort
– Stop the load process and eject the disc.
