Creo bizhub PRESS C6000, User Manual

Page: 139 / 196

Parameter Option Description
Slip sheet Slip sheets
between copies Prints slip sheets with your job. If a job is collated, the slip
sheets are printed between sets. If a job is not collated, the
slip sheets are printed between groups.
●
Tray : The tray in which the specified media type is
loaded.
● Frequency : Enables you to set the number of slip
sheets that you want to print. The default is set to 1.
Image position Same on both
sides Shifts the image on the sheet's second side (face down
image) according to the shift on the sheet's first side (face
up image)
Rear Enables you to define the sheet's edge near the rear of the
printer, where the printing stops.
Lead The edge of a sheet where printing begins.
Tip: Use this option to move duplex page data away from
the spine.
Center Prints your job in the center of the page.
Exceptions tab in the job parameters window
Add and delete page exceptions and inserts
Parameter Option Description
Exceptions Type Define the type of exception for your job. Provides the
following options:
●
Page range —Type the range of pages for the
exception.
● Front cover or Back cover —Select Duplex to print the
first two (or last two) pages of the job as the cover page
(back cover).
Note: If the imposition type is Saddle Stitch , select
Cover to print both a front and back cover page on a
different media type. Select Middle sheet to print the
internal sheet on a different media type.
●
Inserts : Select Before or After and type the page
number that will precede or follow the insert. Then, in
the
Quantity box, type the total number of inserts you
want to add.
Tray The destination tray for the output.
Exceptions tab in the job parameters window 131