Creo bizhub PRESS C6000, User Manual

Page: 20 / 196

Adding a network printer to Windows 7/Vista
To print from a Windows computer, you first need to add a IC-307
print controller virtual printer to your client workstation.
1. From the Start menu, select Devices and Printers .
2. Select Add a printer .
3. In the Add Printer wizard, select Add a network, wireless or
Bluetooth printer .
4. Select The printer that I want isn't listed .
5. In the Select a shared printer by name box, type the IC-307
print controller name, and click Next .
6. Click Next .
7. Select whether you want this to be the default printer, and
then click
Finish to complete the setup.
The IC-307 print controller network printer is added to your printer
list. When you add a network printer, the Print Driver software is
installed on your computer.
Loading the Print Driver software for the first time
Requirements :
A network printer must be defined on your Windows-based
computer.
Load the Print Driver software after installing a network printer so
that the IC-307 print controller will be ready for printing.
1. Open a file with its corresponding application—for example,
open a PDF file in Adobe Acrobat.
2. From the File menu, select Print .
The Print dialog box appears.
3. Select one of the network printers—for example, Print and
click Properties .
A message tells you that the software is loading.
Note: This process may take a few minutes.
After the software loads successfully, click Finish . The job
parameters window appears.
4. Close the job parameters window and printer Print Dialog box
to complete the installation of the Print Driver.
The network printer is set up for printing using the Print Driver
software.
12 Chapter 2—Setting up your computer for printing