Creo bizhub PRESS C6000, User Manual

Page: 131 / 196

Parameter Option Description
Spot color Spot color Provides the following options:
●
Spot Dictionary —Applies the CMYK values that are
defined in the spot color dictionaries. You can edit these
values using the Spot Color Editor tool. The spot color
dictionaries supported are: HKS, DIC Color Guide,
Pantone, Pantone GOE, Pantone Plus, and TOYO.
Refer to the Spot Color Editor window for the complete
list.
● Original file values —Uses the CMYK values from your
file.
●
Destination Profile —Uses the destination profile that is
selected under Color > Color Flow , and applies it to the
spot CMYK values.
Protected Colors CMYK
Note: If you protect RGB, gray, or CMYK colors, all colors
in the job that include the same color combination as the
protected color, will also be protected.
Provides the following options:
● Preserve pure CMY colors —Preserves pure cyan,
magenta, and yellow during transformation.
●
Preserve black color —Preserves pure black during
transformation.
● Use protected CMYK values —Retains CMYK colors
as defined in the Spot Color Editor.
RGB Use protected RGB values —Retains RGB colors as
defined in the Spot Color Editor .
Device Gray Use protected gray values —Retains gray colors as
defined in the Spot Color Editor .
Calibration Linked Uses the calibration table that was created for the media
type and screening method selected for your job
Calibration Latest The last calibration table that was created is applied to your
job.
Normal This table is used if a calibration table has not been created
for the media type, weight, and screening method that you
are using. You cannot edit this calibration table.
None Does not apply a calibration table when jobs are processed
and printed.
Photo touch-up tab in the job parameters window
Apply the most effective image enhancement, and fine-tune
images for reproduction
Note: The Photo Touch-up option is available only with the Process Power Kit.
Photo touch-up tab in the job parameters window 123