Creo bizhub PRESS C6000, User Manual

Page: 137 / 196

Tray Option
Perfect binder main tray The perfect binder provides the following options:
●
Pull Cover from —Enables you to select the
tray that contains the paper on which the cover
will be printed
●
Cover content
●
Blank/Preprinted —Cover is not printed as
part of the job
● Compose from file (Simplex) — Front and
back covers are part of the file and should
be composed and printed on the outside of
the cover sheet
●
Compose from file (Duplex) — Front and
back covers are part of the file and should
be composed and printed on the outside
and inside of the cover sheet
● Print (Simplex) —Front and back covers are
included on the same page in the file and
are printed on the outside of the cover sheet
●
Print (Duplex) —Front and back covers are
included on the same page in the file and
are printed on the inside and the outside of
the cover sheet
●
Cover orientation —Enables you to select the
print orientation of the cover when cover
content is
Print (Simplex) or Print (Duplex)
● Spine
●
Blank —Prints a blank spine
● From file —Prints the spine content
contained on the first page of the file
●
Binding
●
Left
●
Right
● Top
●
Bottom
Notes: Make sure you folow these actions
when you load pre-printed covers into feed
trays:
●
Left Binding—Trays 1, 2, or 3--Load cover
face down, top of cover must point to rear of
machine
● Left Binding—Bypass, Cover tray, PI1,
PI2--Load cover face up, top of cover must
point to rear of machine
Finishing tab in the job parameters window 129