Creo bizhub PRESS C6000, User Manual

Page: 18 / 196

default virtual printers are published on the network with specific
parameters set for processing and printing.
The default virtual printers are:
●
Print —Files sent to this printer are automatically processed
and immediately sent to the printer for printing.
●
Process —Files sent to this printer are automatically processed
and stored in ready-to-print (RTP) format in the Storage area.
Later, you can submit an RTP job for printing, or change the
parameters of the job and resubmit it for processing or printing.
●
Store —Files sent to this printer are spooled to the Storage
area and wait until you submit them for processing and printing.
The files remain in PDL format (such as PS, PDF, VPS, and
PPML).
Print Driver software
Use the Print Driver software to set job parameters when you are
submitting a job to the IC-307 print controller from any application
in your computer. The Print Driver software provides a graphical
user interface that is similar to the IC-307 print controller job
parameters window. The software is automatically installed on a
Windows computer when you set up a network printer.
Note: On a Mac computer, you must install the Print Driver software
manually.
In the Print Driver window, you can perform the following actions:
●
Define or change job parameters regardless of whether your
computer is connected to the server
●
Lock a job for secure printing
●
Save a set of parameters. Sets are useful when you want to
print different jobs with the same parameters, or if you want to
reprint a job.
●
Retrieve a saved set of parameters
●
Check the status of the printer
●
Define PostScript parameters for the job
●
Preview imposition layout
10 Chapter 2—Setting up your computer for printing