Creo bizhub PRESS C6000, User Manual

Page: 105 / 196

9
Scanning documents
Remote Scan Application
To scan a document, you first need to install the Remote Scan
Application (RSA) on your remote computer. Then you create a
scan box on the printer’s hard disk or use one of the default scan
boxes. The scan box acts as a folder for your scanned files. The
settings defined for the scan box determine where and in what
format the scanned files are saved. After you create a scan box,
you can scan your document on the 80 PPM press and 70/60 PPM
press. Using the RSA, you can retrieve files saved on the printer's
hard disk and save them on any remote computer on the network.
The predefined scan boxes are as follows:
●
Calibration . This box is used for off-the-glass calibration. The
calibration database on the IC-307 print controller is
automatically updated when files are scanned to this box.
●
Public . Files scanned to this box are saved on the IC-307 print
controller in the folder
D:\Output\Scan Jobs\Public
.
●
Scan To Print . Files scanned to this box are automatically
submitted for printing on the IC-307 print controller.
Installing the Remote Scan Application in Windows
1. On the Windows desktop, select Start > Run .
2. In the Open box, type
\\
followed by the host name, IP
address, or server name of the IC-307 print controller, and click
OK .
3. On the IC-307 print controller, locate the
D:\Utilities\PC
Utilities
folder.
4. Double-click the
RemoteScan.exe
file.
The RemoteScan Setup dialog box appears.
5. Click Next to accept the specified destination folder for the
Remote Scan Application (RSA) installation files.
The RSA is installed on your Windows computer.
6. Click OK .
7. Click Finish to restart your computer.