![background image](http://html1.mh-extra.com/html/cpi/cmp-200/cmp-200_service-manual_2675020189.webp)
3C
Interfacing and Programming
CPI Canada Inc.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-120
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
3C.13.10 Touchscreen Console Firmware Upgrade / Restore (Cont)
Step Action
10.
The progress of the installation will be shown on the
Updating Touch Screen
window.
NOTE: IN THE EVENT THE UPGRADE SHOULD FAIL, THE DETAILS OF THE ERROR WILL BE DISPLAYED IN RED AT
THE BOTTOM OF THE SCREEN AND A POP-UP WINDOW WILL DISPLAY ASKING IF YOU WOULD LIKE TO
RETRY OR ABORT THE UPGRADE. THE CAUSE OF THE FAILURE SHOULD BE DETERMINED BEFORE
RETRYING THE UPGRADE.
11.
Once the installation process is finished, a pop-up window will display stating:
It is very important that you do not disturb this
process
(see figure 3C-44)
.
The flash memory is being erased and reloaded with the upgraded firmware.
Figure 3C-44: Erasing Flash memory pop-up window