CPI Canada Inc.
Interfacing and Programming
3C
Use and disclosure is subject to the restrictions on the title page of this CPI document.
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
Page 3C-65
3C.7.5 AEC Setup (Cont)
Use these steps to perform the initial AEC setup. Refer to the definitions in the previous table.
Step
Action (membrane console)
Action (PC GenWare
®
)
Action (Touchscreen GenWare
®
)
1.
From the
GEN CONFIGURATION
menu,
select
AEC SETUP
.
From the GenWare
®
GENERATOR
UTILITIES application, select
AEC Setup
and Calibration
from the
Setup
menu, or
use the AEC Setup & Calibration button
on the GenWare
®
toolbar.
Press the
button on the
GenWare
®
toolbar to access the
AEC
Setup and Calibration
utility.
2.
Select the
AEC Setup
tab.
Select the
AEC Setup
tab.
3.
From
AEC SETUP
menu 1, select the
AEC channel to be programmed.
Pressing the
CHANNEL
button will scroll
through the available AEC channels.
Under
Channel Number
, select the AEC
channel that is to be programmed.
Under
Channel Number
, select the AEC
channel that is to be programmed.
4.
Select
LEFT FIELD
. Toggle the button to
select
YES
or
NO
.
Click the left field on the graphic under
Fields
to enable / disable that field. Black
indicates that the selected field is
disabled; green indicates that the
selected field is enabled.
Click the left field on the graphic under
Fields
to enable / disable that field. Black
indicates that the selected field is
disabled; green indicates that the
selected field is enabled.
5.
Repeat the above for the
CENTER
and
RIGHT
fields.
Repeat the above for the center and right
fields.
Repeat the above for the center and right
fields.
Select
CHAMBER TYPE
. Use the
+
or
–
buttons to select the desired AEC
chamber type.
Under
Chamber Type
, select the desired
AEC chamber type.
Under
Chamber Type
, select the desired
AEC chamber type.
6.
Select
ION
if using solid state AEC board assembly 737992.
7.
Select the
Film Screen options
tab.
Select the
Film Screen options
tab.
8.
Select
FILM SCREEN 1
. Toggle the
button to select
YES
or
NO
.
Under
Film Screen Active,
select film
screen
1.
An
X
in the check box indicates
that film screen 1 is enabled.
Under
Film Screen Active,
select film
screen
1.
An
X
in the check box indicates
that film screen 1 is enabled.
9.
Repeat the above for
FILM SCREEN 2
and
FILM SCREEN 3
.
Repeat the above for film screen 2 and
film screen 3.
Repeat the above for film screen 2 and
film screen 3.
10.
Press
>>
. Select
the
AEC setup
tab.
Select the
AEC setup
tab.