![background image](http://html1.mh-extra.com/html/cpi/cmp-200/cmp-200_service-manual_2675020129.webp)
3C
Interfacing and Programming
CPI Canada Inc.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-60
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
3C.7.4 I/O Configuration (Cont)
Step
Action (membrane console)
Action (PC GenWare
®
)
Action (Touchscreen GenWare
®
)
9.
Reselect
I/O CONFIGURATION,
and
then select the next receptor to be
programmed.
Select the next receptor to be
programmed. Use the
Receptor
tabs on
the
Receptor Setup
window.
Select the next receptor to be
programmed. Use the
Receptor
buttons
on the
Receptor Setup
window.
10.
Program all inputs and outputs for the selected receptor.
11.
When finished programming all receptors,
exit to the
GEN CONFIGURATION
menu.
The input and output programming should be recorded in a copy of the table below. This will provide a record of the I/O configuration for
future reference.
FUNCTIONS
STANDBY
PREP
GEN RDY
RAD EXP
INPUTS
TUBE THERMAL SW.
DOOR ITLK.
INTERLOCK 1
INTERLOCK 2
BUCKY 1 RDY
BUCKY 2 RDY
OUTPUTS
BKY 1 START
BKY 2 START
ROOM LIGHT