![background image](http://html1.mh-extra.com/html/cpi/cmp-200/cmp-200_service-manual_2675020110.webp)
CPI Canada Inc.
Interfacing and Programming
3C
Use and disclosure is subject to the restrictions on the title page of this CPI document.
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
Page 3C-41
3C.7.2 Generator Limits (Cont)
Use these steps to set the generator limits. Refer to the definitions in the previous table.
Step
Action (membrane console)
Action (PC GenWare
®
)
Action (Touchscreen GenWare
®
)
1.
From the
GEN CONFIGURATION
menu,
select
GENERATOR LIMITS
.
Select
Generator Limits
from the
Setup
menu, or use the generator limits button
on the GenWare
®
toolbar.
Press the
button to access the
Generator Limits
utility.
17.
Select
MAX KW
. Use the
+
or
–
buttons
to set the maximum kW.
Set the maximum kW via the
Max.
Generator Power (kW)
dialog box.
Set the maximum kW via the
Max
Generator Power (kW)
dialog box.
18.
Select
MAX MA
. Use the
+
or
–
buttons to
set the maximum mA.
Set the maximum mA via the
Max.
Generator Current (mA)
dialog box.
Set the maximum mA via the
Max
Generator Current (mA)
dialog box.
2.
Select
MIN MA
. Use the
+
or
–
buttons to
set the minimum mA.
Set the minimum mA via the
Min.
Generator Current (mA)
dialog box.
Set the minimum mA via the
Min
Generator Current (mA)
dialog box.
3.
Select
MAX MAS
. Use the
+
or
–
buttons
to set the maximum mAs.
Set the maximum mAs via the
Max.
Generator Current-Time (mAs)
dialog
box.
Set the maximum mAs via the
Max
Generator Current-Time (mAs)
dialog
box.
4.
Select
ROTOR BOOST.
Use the
+
or
–
buttons to set the low speed starter boost
time.
This function is not available in
GenWare
®
This function is not available in
GenWare
®
5.
Press
EXIT
to return to the
GEN
CONFIGURATION
menu.