![background image](http://html1.mh-extra.com/html/cpi/cmp-200/cmp-200_service-manual_2675020158.webp)
CPI Canada Inc.
Interfacing and Programming
3C
Use and disclosure is subject to the restrictions on the title page of this CPI document.
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
Page 3C-89
3C.13.2 APR Editor (Cont)
To edit (change the name of) an APR item.
Step Action
1.
Select the APR item as per step 1 under
“To change parameters or technique for an existing APR item”.
The selection will
be highlighted.
2.
Press
Edit
. Keyboard(s) will display on the screen as described above, with the current name of the APR item highlighted.
•
Press
CANCEL
on the lower keyboard to exit without changing the name.
•
Press
DEL
to delete the highlighted name on the keyboard.
•
Type in the new name for that APR item. Use the
BACKSPACE
key to back space if corrections are needed.
•
Add / edit the ID code if desired (if displayed).
•
Press
ENTER
when finished.
To delete an APR item.
Step Action
1.
Select the APR item to be deleted. The selection will be highlighted.
2.
Press
Delete
. A pop-up window will display asking if you are sure you want to delete this item. Press
YES
to delete the item;
NO
cancels the deletion.
To add an APR item.
Step Action
1.
Select the appropriate location to add the APR item. An APR item may be added directly to a main APR menu, or may be added
to a submenu of another menu or procedural item.
If the APR item is to be added to a submenu of a menu or procedural item, select the parent menu item or procedural
item, then press
Open Sub-Menu
. It may be necessary to drill down through several submenus to find the desired location for the
new APR item.
2.
Press
Add
. A pop-up window will display allowing you to select three item types to be added. Select
APR Item
(this is the default
selection, and the only available selection if adding to a procedural menu).
3.
Press
OK
to continue.
Cancel
will cancel this action.