![background image](http://html1.mh-extra.com/html/cpi/cmp-200/cmp-200_service-manual_2675020168.webp)
CPI Canada Inc.
Interfacing and Programming
3C
Use and disclosure is subject to the restrictions on the title page of this CPI document.
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
Page 3C-99
3C.13.6 Touchscreen
Setup
The touchscreen setup menu accesses submenus that allow the service engineer to perform the following functions:
•
Enable or disable certain console functions (audible generator ready indication).
•
Enable or disable optional digital features.
•
Set up serial communication ports COM 1 and COM 2 on the touchscreen console.
•
Select the language for operator and error messages and graphics (i.e. on buttons, etc).
•
Select the generator type.
•
Select the screen saver interval.
•
Select the general and exposure volumes.
•
Select the LCD brightness
•
Change the operator and service password.
•
Set the customer code.
Use these steps to access the touchscreen setup menu.
Step Action
1.
From the system utilities menu, press
Touch Screen Setup.
2.
The touchscreen setup window will be displayed (figure 3C-30). This has three tabs,
SETTINGS
,
FEATURES
and
PASSWORDS
that will be discussed in sequence.