![background image](http://html1.mh-extra.com/html/cpi/cmp-200/cmp-200_service-manual_2675020103.webp)
3C
Interfacing and Programming
CPI Canada Inc.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-34
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
3C.7.1 Tube Selection / Tube Setup (Cont)
FUNCTION
(MEMBRANE
CONSOLE)
FUNCTION
(GenWare
®
)
DESCRIPTION
MAX SF MA
Max. SF Current
(mA)
Sets the maximum mA in small focus. This should be set as low as possible to prevent focal
spot track wear and focal spot blooming.
ANODE HU
WARNING
Anode Warning
(%)
Sets the limit at which the anode heat-warning message is displayed.
ANODE HU LIMIT
Anode Limit (%)
Sets the limit at which exposures will be inhibited. If the anode heating is currently under the
limit, the next exposure will be inhibited if the generator calculates that the exposure will exceed
the anode HU limit.
*
The stated maximum kW limits apply at the 100 ms point on the X-ray tube load ratings curve. Increasing or decreasing the kW limits will
shift the entire curve up or down proportionately to the percentage kW change.
Use these steps to select the desired tube type.
Step
Action (membrane console)
Action (PC GenWare
®
)
Action (Touchscreen GenWare
®
)
1.
From the
GENERATOR SETUP
menu,
select
GEN CONFIGURATION
.
Select
Tube Selection
from the
Setup
menu, or use the tube setup button
on the GenWare
®
toolbar.
Press the
button from the
GenWare
®
toolbar to access the
Tube
Setup
utility.
2.
From the
GEN CONFIGURATION
menu,
select
TUBE SELECTION
.
Select the
Tube Library
tab.
Select the
Tube Library
tab.
Choose the desired tube type by pressing
the button adjacent to the desired
selection. Use the
>>
and
<<
buttons to
navigate through the tube selection
menus if the desired tube is not displayed
on the current screen.
Additional tube types may be downloaded
using the console utility in GenWare
®
.
Choose the desired tube type from the
tube library.
Press
Download
to download the
selected tube to the generator.
Choose the desired tube type from the
tube library.
Press
Upload Tube to Generator
to
download the selected tube to the
generator.