![background image](http://html1.mh-extra.com/html/cpi/cmp-200/cmp-200_service-manual_2675020192.webp)
CPI Canada Inc.
Interfacing and Programming
3C
Use and disclosure is subject to the restrictions on the title page of this CPI document.
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
Page 3C-123
3C.13.11 Generator Configuration Backup and Restore (Cont)
Step
Action
3.
To exit the
Backup and Restore
utility, press
Close
.
To create a new backup file.
1.
Press the
Backup
button.
2.
Use the keyboard displayed to enter a name for the backup file you wish to create into the
Backup File Name
window. Note that
the keyboard will only become active after the
Backup
button is pressed.
3.
The newly created backup file will be saved on the touchscreen compact flash card and will appear in the
Touchscreen
window.
To restore a previously saved backup file to the generator
Note: Backup files can only be restored from the touchscreen window. If the desired backup file resides on a USB flash drive it
must be copied to the touchscreen before restoration. Please see “To copy a backup file from a USB device”.
1.
Select the desire backup file from the
Touch Screen
window.
2.
Press the
Restore
button.
To copy a backup file to a USB device
1.
Select the desire backup file from the
Touch Screen
window.
2.
Press the
button to save the file to the USB flash drive.
3.
The copied file will appear in the
USB Device
window.
To copy a backup file from a USB device
1.
Select the desired file from the
USB Device
window.
2.
Press the
button to save the file to the touchscreen compact flash card.
3.
The copied file will appear in the
Touch Screen
window.