3C
Interfacing and Programming
CPI Canada Inc.
Use and disclosure is subject to the restrictions on the title page of this CPI document.
Page 3C-102
CMP 200
®
X-Ray Generator Service Manual Ch # 901476-04 Rev. C
3C.13.6 Touchscreen Setup (Cont)
Step Action
9.
Set the
Exposure Volume
by dragging the slider to the left (lower) or right (louder). This sets the loudness of the exposure active
tone.
10.
Set the
LCD Brightness
by dragging the slider left (dimmer) or right (brighter). This sets the brightness of the LCD display.
11.
Press
OK
to continue or
CANCEL
to return to the system utilities menu without making any changes. If
OK
was pressed, a pop-
up window will display asking if you wish to save the changes. Press
YES
to save the changes. Press
NO
to return to the system
utilities menu;
CANCEL
cancels the changes.
Features
Use these steps to select the digital functions.
Step Action
1.
From the touchscreen setup window, select
FEATURES
. Available digital interfaces will be shown on this screen.
Figure 3C-31: Touchscreen setup window, Features tab
