CPI CMP 200 Service Manual Download Page 177

Page: 177 / 307

Interfacing and Programming

CPI Canada Inc.

Use and disclosure is subject to the restrictions on the title page of this CPI document.

Page 3C-108

CMP 200

X-Ray Generator Service Manual Ch # 901476-04 Rev. C

3C.13.9 Configuration Backup / Restore (Cont)

To back-up current receptor / auto-position symbols.

Step Action

Press

Backup

One or two keyboard(s) will display on the screen as described under APR Editor.

•

Type in the name of the new backup file.

•

Press

ENTER

when finished. The console will return to the configuration backup / restore menu, and the

backed up file will be displayed in the

Configuration Backup And Restore

window.

To restore backed-up receptor / auto-position symbols.

Step Action

Select the desired backup file from the configuration backup and restore menu. The selection will be highlighted.

Press

Restore

A pop-up window will briefly display indicating the file-restoration status. The file restoration is finished when the pop-up window
closes.

To delete a receptor / auto-position symbols file.

Step Action

Select the backup file to be deleted. The selection will be highlighted.

Press

Delete

. A pop-up window will display asking if you are sure you want to delete this file. Press

YES

to delete the file;

cancels the deletion.

Summary of Contents for CMP 200




















































































































































































































































































































Search results

Summary of Contents for CMP 200

Reviews:

Related manuals for CMP 200

Brands by name

Popular brands

CPI CMP 200, Service Manual

Search results

Summary of Contents for CMP 200

Reviews:

Related manuals for CMP 200

Brands by name

Popular brands