![background image](http://html1.mh-extra.com/html/ram/microlab-350/microlab-350_user-manual_4329630001.webp)
FOR YOUR SAFETY, KEEP THE FOLLOWING
Do not use with damaged our faulty power cord,
plug, and outlet, contact to the manufacturer. If
may cause the danger of fire, electric shock.
When unplug the power cord, hold the plug and
do not touch with wet hand. Do to use with
loosing power plug causing the danger of electric
shock and fire.
Do not bend the power cord excessively and do
not press with heay things. If may cause electric
shock and fire.
Do not place near heat equipment and candles or
cigarette causing fire.
Close supervision needs if this product is used by
or near by the very young, the elderly or invalid.
Do not leave children unattended in any room
where this products has been installed.
Use the grounding conductor. Breakage or
electric leak may cause the danger of electric
shock.
For grounding, inquiry to electrician or to main
office.
In case of using extension cord, do not use many
electricity equipments in one time. It causes fire
and electric shock.
Do not place or set up the product in the humid
and rainy or snowy location.
It brings the danger of electric shock and fire.
Do not drop or damage the handpiece. In case of
malfunction, dropping, drowning, do not use and
contact to the manufacturer, (If may cause
vibration of the bur, overheating, or damage of
the bearings.)
Use the products in proper use as per the instruc-
tion and do not use not recommended by the
manufacturer.
If may cause injury or property loss if not
following the instructions.
Saeshin is not responsible for the accident causing
by not following the instructions.
Type of protection against electric shock:
Class I equipment
Degree of protection against electric shock:
Type B applied parts
Classification according to the degree of
protection against ingress of water as detailed
in the current edition of
IEC 60529:
Equipment: IPX0, ordinary equipment
Foot witch: IPXI
This equipment is not suitable for use in the
presence of flammable anesthetics or oxygen
Made of operation: continuous operation
“This equipment has been tested and found to
comply with the limits for medical devices in
IEC 60601-1-2:1994. These limits are designed
to provide reasonable protection against
harmful interference in a typical medical
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions,may cause harmful interference to
others devices in the vicinity. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to other
devices, which can be determined by turning
the equipment off and on the user is
encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving device.
Increase the separation between the
equipment.
Connect the equipment into an outlet on a
circuit different from that to which the other
device(s) are connected.
Consult the manufacturer or field services
technician for help.”
Ram Products, Inc.
182 Ridge Road, Suite D
Dayton, N.J. 08810
Monday thru Friday 8:30 - 6:30 EST
Phone: 1-877-RAM-PROD / 1-732-651-5500
Fax: 1-732-651-6688
or e-mail us at [email protected]
182 Ridge Road, Suite D Dayton, N.J. 08810
www.ramprodinc.com | Phone: 1-877-RAM-PROD / 1-732-651-5500