1
VL1600 PROFILE
QUICK START GUIDE
443581625410 REV 00 10/21
OVERVIEW
VL1600 Pro
fi
le, black
74016-001
VL1600 Pro
fi
le, white
74816-002
VL1600 PROFILE
INCLUDED ITEMS
This document provides basic setup instructions and safety
warnings for the following product(s):
QUICK START
GUIDE
POWER
CONNECTOR
WARRANTY
CARD
CONNECTING POWER
This fi xture requires standard AC power distribution from 100-240VAC, 50/60 Hz. Current required
depends on the AC supply voltage and product model.
NOTE:
The mating Neutrik® powerCON® True1 connector is supplied; however, you will need to purchase or
construct a cable appropriate for your application.
Depending on the application, the luminaire’s AC input cable may require
a diff erent connector. If required, install a new connector meeting your
requirements using the following wire color code reference:
WARNING:
DO NOT connect to three-phase service in countries with 240V power.
INSTALLATION AND SETUP
DATA IN
DATA
THRU
USB
NETWORK
AC
POWER
THRU
AC
POWER
INPUT
WIRE* CONNECTION
Green/yellow
AC ground
Blue
AC neutral
Brown
AC line
* International (Harmonized) Standard
Single-phase power from 100-240V RMS:
Three-phase power at 208V RMS:
CONNECTION
PIN
AC neutral
X
AC line
Y
Ground (earth)
G
X
Y
G
CONNECTION
PIN
Phase 1
X
Phase 2
Y
Ground (earth)
G
CURRENT VERSUS VOLTAGE
TABLE 1
provides the luminaire’s current draw at
specifi c voltages. Total luminaire current is calculated
with the lamp on and all motors sequencing.
CONNECTING DATA
A maximum of 32 luminaires may be connected in
any one DMX data link.
NOTE:
This maximum limit applies to the luminaire “daisy
chain” only. Your system or console may require fewer
luminaires on a single data link path. Consult your console
documentation for more information.
AC VOLTAGE
AT 60HZ
TOTAL LUMINAIRE CURRENT
(MOTOR + LAMP CURRENT)
100V
7.8A
110V
7.0A
120V
6.4A
130V
5.9A
200V
3.8A
210V
3.6A
220V
3.4A
230V
3.3A
240V
3.2A
TABLE 1. CURRENT VS. VOLTAGE (550W LED)
