Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 87 / 866

4. The downgrade software is downloaded, unpacked, and run. The following prompt is dis-
played:
Please enter the URL for the the system restore image for THIS SYSTEM.
If a username and/or password is required in order to retrieve the
file, the username (and optionally the password) must be embedded in
the URL using standard URL syntax.
For example, if the file is at:
ftp://www.coyotepoint.com/example/Z20CA-31337.xrb
And you use username 'user' and password 'pass' to access that site,
then use URL:
ftp://user@www.coyotepoint.com/example/Z20CA-31337.xrb
or URL:
ftp://user:pass@www.coyotepoint.com/example/Z20CA-31337.xrb
to retrieve the file.
Please enter the URL:
Enter the URL where you saved the restore system image created during the upgrade to EQ/OS
10, as in this example:
ftp://ftp@10.0.0.21/folsom/A107A-17004.xrb
5. The downgrade script then retrieves, decrypts, and installs the restore image from the URL
you provided. During this process you are asked to enter the restore image password. At
the prompts indicated in the sample output below, enter the
restore image
password
(
restore_password
) and press the Enter key to continue:
Retrieving expected SHA1 signature for restore image file. Computing SHA1
signature of restore image file.
If you were prompted (and re-prompted) to enter a restore image
password when you created the restore image, then the image was
encrypted.
Was the restore image encrypted [Y/N]?
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 87
Equalizer Administration Guide