Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 699 / 866

Adding Smart Controls
Smart Controls can be added using the CLI or GUI. If you associated an alert with a Smart
Control, the means which you selected to notified of the alert will be displayed.
Refer to
"Smart Control"
on page 211 for a listing of all of the CLI Smart Control commands.
Adding a Smart Control using the CLI
1. Enter the following to assign a name to the smart event.
eqcli > smart_control smart_control_name
2. Activate the editor by entering the following in the smart control context.
eqcli > script edit/URL
where:
edit
invokes the script editor to enter/create the desired script
URL
fetches the script from the entered fully qualified ftp/http site
3. Create/edit the script in the script editor and save the script to the data store.
4. Determine whether the script is to be run by schedule or at an interval by entering either of
the following.
a. Running the script at an interval will run the selected script at the
interval
assigned.
eqcli sc - scname > interval seconds
where
seconds
is the number of seconds at which the script will run.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 699
Equalizer Administration Guide