Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 596 / 866

Failover
6. Show the fo group details and status as follows:
a. For
fo_group1
:
eqcli >
show fogrp fo_group1
F/O Group fo_group1:
ID = 1
Preferred Peer = Eq-A
Primary Peer = Eq-A
F/O Mode = Primary
Subnet Members (num = 2):
vlan2:172net
vlan3:192net
Cluster Members (num = 2):
c1A
clB
Server Members (num = 2):
sv2
sv3
eqcli >
b. For
fo_group2
:
eqcli > show fogrp fo_group2
F/O Group fo_group1:
ID = 1
Preferred Peer = Eq-B
Primary Peer = Eq-A
F/O Mode = Backup
Subnet Members (num = 2):
vlan2:172net
vlan3:192net
Cluster Members (num = 2):
c1A
clB
Server Members (num = 2):
sv2
sv3
eqcli >
After the above procedure is completed, the object configuration should get
synchronized over to Eq-B and Eq-C. All Equalizerobjects will be visible in the CLI and
GUI of all peers. The two clusters will continue to run on Eq-A until they are
"rebalanced" (Refer to
"Rebalancing"
on page 590).
596 Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.