Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 328 / 866

Working with Clusters and Match Rules
Follow these steps to delete a new Layer 7 or Layer 4 virtual cluster using the GUI:
1. Log into the GUI using a login that has add/del access for global parameters (See
"Logging
In"
on page 230)
2. Do one of the following:
a. Right click on a cluster on the left navigational pane and select
Delete Cluster
.
b. Click on a cluster on the left navigational pane and drag to the
Delete
(Trash)
icon.
Using the CLI:
Add a cluster using eqcli as follows. In this example a Layer 7 HTTPS cluster is created. Since the
protocol is HTTPS, port 443 is used.
1. Log in to eqcli as described in
"Starting the CLI"
on page 141.
2. Enter the following at the CLI prompt:
eqcli >
cluster [ clustername ] proto protocol ip [ xxx.xx.x.xxx] port xxx
Do the following to delete a cluster using eqcli as follows:
328 Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.