manualshive.com logo in svg

Coyote Point Systems Equalizer GX Series, Administration Manual

The Coyote Point Systems Equalizer GX Series Administration Manual is a comprehensive guide that enables users to efficiently manage their network appliances. This essential manual can be easily downloaded for free from our website, providing users with the necessary knowledge to effortlessly navigate and optimize their product experience.

Share
Download
background image

Failover

Testing Active/Active Failover

1. First verify that Active/Passive failover works. Refer to

"Enabling Active/Passive Failover Between

Two Systems"

on page 555.

2. With Active/Active failover enabled:

a. Configure more than 1 cluster, but all in the same Failover Group and verify

that failover works the same as with an Active/Passive setup. Perform this with
preferred_peer not set on the clusters, and then set and verify that the clusters
are instantiated on the appropriate Peer and that they "failed over" as expected.

b. Configure one or more clusters on each subnet, setting a different preferred_

peer for each Failover Group. Verify that the clusters are instantiated on the
appropriate Peer and that they "fail over" as expected.

c. Using multiple failover groups, configure servers for the clusters, using both

spoof and non-Spoof.For non-spoof, configure servers on a different subnet
than the cluster. For spoof, configure servers on a different subnet than the
cluster.

d. Using multiple Failover Groups, change the configuration such that 2 Failover

groups will be merged and verify that all work as expected. For example, sup-
pose there are 2 F/O Groups:

l

F/O Group 1 -has subnet 172.16.0/24 with cluster cl01 (172.16.0.211), server
sv01 (172.16.0.181) and floating IP 172.16.0.219.

l

F/O Group 2 - has subnet 192.168.0/24 with cluster cl02 (192.168.0.211),
server sv02 (192.168.0.181) and floating IP 192.168.0.219.

l

If the clusters are using spoof and sv03 (192.168.0.182) is added to the server
pool for cluster cl01, this will cause F/O Groups 1 and 2 to be merged into a
single F/ O Group that includes cl01, cl02, sv01, sv02, sv03, and subnets
172.16.0/24 and 192.168.0/24.

e. Then, change the configuration such that the single F/O group is split into 2 F/O

Groups.(e.g., by deleting sv03 from cl01, above.)

Verify that:

l

All clusters can pass traffic.

l

Failover occurs as expected if one Peer fails.

l

The F/O Groups are rebalanced appropriately when the rebalance command is
executed.

582

Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.

Summary of Contents for Equalizer GX Series



































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Equalizer GX Series

Teac NP-H750 Release Notes preview
NP-H750
Brand: Teac Pages: 3
Magnavox MME100 - Audio Micro System User Manual preview
MME100 - Audio Micro System
Brand: Magnavox Pages: 23
Cambridge Research Systems MR Confon Starter f MKII+ User Manual preview
MR Confon Starter f MKII+
Brand: Cambridge Research Systems Pages: 34
Panasonic SC-MAX8700 Owner'S Manual preview
SC-MAX8700
Brand: Panasonic Pages: 64
Panasonic SC-PM700 Owner'S Manual preview
SC-PM700
Brand: Panasonic Pages: 31
3M PELTOR ComTac 7 Manual preview
PELTOR ComTac 7
Brand: 3M Pages: 41
Radio Shack 32-2059 User Manual preview
32-2059
Brand: Radio Shack Pages: 11
NAD 7020 Specification Sheet preview
7020
Brand: NAD Pages: 3
NAD C 725BEE Owner'S Manual preview
C 725BEE
Brand: NAD Pages: 24
Lectrosonics FM-AV4 Operating And Troubleshooting Manual preview
FM-AV4
Brand: Lectrosonics Pages: 18
Denver MMP 351 Manual preview
MMP 351
Brand: Denver Pages: 9
Denver MCA-160 Instruction Manual preview
MCA-160
Brand: Denver Pages: 18
camry CR 1173 User Manual preview
CR 1173
Brand: camry Pages: 188
NAD C730 Owner'S Manual preview
C730
Brand: NAD Pages: 32
NAD C 720BEE Service Manual preview
C 720BEE
Brand: NAD Pages: 38
K&F Sona 5 User Manual preview
Sona 5
Brand: K&F Pages: 19
SPYSONIC PANEL XXL+ User Manual preview
PANEL XXL+
Brand: SPYSONIC Pages: 2
Daktronics P1756 Installation Manual preview
P1756
Brand: Daktronics Pages: 36

Brands by name

Popular brands

Load more brands