System Settings
Configuring Link Aggregation using the CLI
To create a link aggregation group and assign it to a VLAN using the CLI, do the following:
1. Create an aggregation group as follows.
eqcli >
agr agr00
2. Specify the physical interfaces to be added to the aggregation group:
eqcli >
agr agr00 ifi ge01,ge02
In the command line above,
agr00
is the name assigned to the aggregation group;
ge01
and
ge01
are the physical interfaces (front panel ports) assigned as interfaces
instances (
ifi
) to the group.
3. Verify the aggregation configuration by entering:
eqcli >
show agr agr00
AGR Name
: agr00
Flags : lacp
Interfaces
:
eqcli >
Note
- The LACP flag is enabled by default.
4. If you have not done so already, create a VLAN and do not assign any interfaces to it. See
on page 297 for how to create a VLAN.
5. Add an instance of the new link aggregation group created above. In the example below, an
interface instance of the
agr00
aggregated link created above is added to the VLAN
vl00
as a tagged interface.
eqcli >
vlan vl00 ifi agr00 type tagged
6. Verify the new VLAN configuration and associated interfaces by entering:
eqcli >
show vlan v100
VLAN Name
: v100
292
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
Summary of Contents for Equalizer GX Series
