l
Autonegotiation mode - Use one of the following:
full
-
Full autonegotiation at all supported speed and duplex settings.
select
- Autonegotiation at the current speed and duplex parameter settings only.
force
- Set the port to the current speed and duplex parameter settings with no
autonegotiation.
Whether you choose
full
,
select
, or
force
depends on the operating characteristics of the
device on the other end of the connection. Check the documentation for the other device and
try to match the settings as much as possible on both sides of the connection.
l
Duplex Mode
-
If the port status is Link Up, this is the current port duplex setting. If the status
is Link Down, this is either the highest duplex that can be negotiated, or the force setting.
Can be set to full or half.
l
Link Speed
-
If the port status is
Link Up
, this is the current port speed. If the status is
Link
Down
, this is the highest speed that can be negotiated, or the
Force
setting. Can be set to
10,
100,
or
1000
Mbits.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved.
117
Equalizer Administration Guide
Summary of Contents for Equalizer GX Series
