Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 141 / 866

Starting the CLI
The Equalizer Command Line Interface, CLI, gives you complete administrative control over
Equalizer and is one of the major new features in EQ/OS 10. The GUI is also available to view and
modify the configuration, however, not all administrative options have been enabled in the GUI.
The CLI can be used over either a serial connection or an SSH connection.
Logging In to the CLI Over a Serial Connection
To start the Equalizer CLI over a serial connection:
1. Connect the supplied serial cable to Equalizer’s front panel serial port and to a properly con-
figured terminal or terminal emulator, as described in
"Quick Start"
on page 58.
2. Press the <Enter> key to display the login prompt:
Equalizer -- EQ/OS 10
Username:
3. Log in using an Equalizer user name and password. If this is the first time you are logging
in, use the default administrative user name and password as shown below:
Username: touch
Password: touch
Login successful.
EQ/OS 10
Copyright 2013 Fortinet, Inc.
Welcome to Equalizer!
eqcli >
See the section
"Working in the CLI"
on page 144 to begin familiarizing yourself with the CLI
command environment.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 141
Equalizer Administration Guide