Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 565 / 866

5. Now create a peer definition for the preferred backup on the primary Equalizer:
a. Enter the following:
eqcli > peer name signature signature
Substitute the signature of the preferred backup that you obtained in Step
3, above.
b. Verify the new peer definition by entering:
eqcli >
show peer
------------------------------------
Configuration Sequence Number: 4593
------------------------------------
Peer Name Type Flags F/O Mode Error?
eq_00241DB2ABA0 (Local) OS/10 F/O, P/P, xfr Primary No
eq_001D7D78E13E (Remote) OS/10 F/O,xfr Backup No
Flags Key:
F/O => failover
A/A => active-active
P/P => preferred-primary
xfr => fo_config_xfer
ssl => use_ssl
c. Now you will need the peer signature from the primary Equalizer. Enter the fol-
lowing:
eqcli > show peer name
Where
name
is the name of the peer for the primary Equalizer. The
following will be displayed.
eqcli > show peer eq_001D7D78E13E
Peer Name : eq_001D7D78E13E
Peer signature :
1RBC14245CBCC7552362679F0E2AD4C0B2CF0C6E6B84AC1000D2
Peer sysid : 001D7D78E13E
Flags : failover, fo_config_xfer
[remainder of output omitted...]
Record the
Peer signature
displayed, or copy it using your terminal
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 565
Equalizer Administration Guide