Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 607 / 866

2. After you complete Step 1 on all three Equalizers, do the following on Equalizer
Eq-A
:
a. Create the clusters, servers, server pools, and server instances necessary for
your configuration. For the purposes of this procedure, we created the following
objects and non-default settings:
eqcli > server sv2 proto tcp ip 172.16.0.170 port 80
eqcli > srvpool sp01 policy adaptive
eqcli > srvpool sp01 si sv2 weight 100
eqcli > cluster clA proto http ip 172.16.0.161 port 80 srvpool sp01
eqcli > server sv3 proto tcp ip 172.16.1.170 port 80
eqcli > srvpool sp02 policy adaptive
eqcli > srvpool sp02 si sv3 weight 100
eqcli > cluster clB proto http ip 172.16.1.161 port 80 srvpool sp02
eqcli > server sv4 proto tcp ip 192.168.0.24 port 80
eqcli > srvpool sp03 policy adaptive
eqcli > srvpool sp03 si sv4 weight 100
eqcli > cluster clC proto http ip 192.168.0.161 port 80 srvpool sp03
eqcli > server sv5 proto tcp ip 192.168.1.24 port 80
eqcli > srvpool sp04 policy adaptive
eqcli > srvpool sp04 si sv5 weight 100
eqcli > cluster clC proto http ip 192.168.1.161 port 80 srvpool sp04
Note - In this procedure, we create all of the clusters, servers, and server pools on the preferred primary Equalizer,
assign a preferred peer to each cluster, and then rebalance to move the clusters to their preferred peer Equalizers.
You could also create your clusters on the other peers. If you do, be sure to specify a preferred peer for each cluster
when you create them if you want them to be instantiated on that peer; otherwise, they will be instantiated on the peer
that has the preferred primary flag enabled.
b. Update the flags for peer
Eq-A
:
eqcli >
peer Eq-A flags failover,fo_config_xfer,preferred_
primary,active-active
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 607
Equalizer Administration Guide