Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 705 / 866

Schedule/Interval Configuration
The following is an example of the
Configuration > Schedule/Interval
screen. From this screen you have
the option of configuring the Smart Control to be executed using the fine-grained scheduling tools
and options or you can configure it to be executed at regular intervals. To using the Schedule
feature, click on the
Schedule
option and then select the frequency option that you want to use in
the
Repeat Every
column. To use the Interval option, click on the Interval option and configure the
Run Every
options that you require:
Year
The Yearly configuration screen will be displayed when you select
Schedule
and then select the
Year
option. These scheduling options allow you to configure a Smart Control to be executed on a
monthly basis, by date and hour (24 hour clock), minutes and seconds. In the example below, the
Smart Control is scheduled to be executed on the 4th, 8th, 15th and 25th of March, May, and
September at 13:00. (1PM).
1. Select the
Months
and
Days
by clicking them. You can select one or all of the months or days.
Click on a previously selected month or day to unselect it.
2. Select the Smart Control execution
Time
by using the
Hour
,
Minute
, and
Second
selectors.
3. Click on
Commit
to save the Scheduling options.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 705
Equalizer Administration Guide