Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 224 / 866

Working in the CLI
Subnet Specific Context Commands
eqcli vl- vlname -sn- subname >
flags
[!]heartbeat}
: Set subnet flags
eqcli vl- vlname -sn- subname >
force
: Force the subnet modification,
ignoring any conflicts.
eqcli vl- vlname -sn- subname > from ip_addr : Set NAT from IP (with or
without CIDR notation).
eqcli vl- vlname -sn- subname > hb_interval : Set the heartbeat probe inter-
val for a subnet.
eqcli vl- vlname -sn- subname >
ip
: Set the subnet IP address.
Required.
eqcli vl- vlname -sn- subname >
nat
: Add or modify a subnet nat.
eqcli vl- vlname -sn- subname > no parameter : Delete a route or reset a sub-
net parameter to its default
value.
eqcli vl- vlname -sn- subname > no route src
dest
: Remove a route
eqcli vl- vlname -sn- subname > out ip_addr : Set NAT out IP.
eqcli vl- vlname -sn- subname >
permit
: Set the list of permitted sub-
nets on a subnet.
eqcli vl- vlname -sn- subname >
route
: Add or modify a subnet route.
eqcli vl- vlname -sn- subname > services {!]
http,[!]https,
[!]ssh, [!]snmp,
[!]envoy, [!]envoy_agent,
[!]fo_http, [!]fo_https,
[!]fo_ssh,[!]fo_snmp,
[!]fo_envoy,[!]fo_envoy_agent}
: Subnet Services (see below)
eqcli vl- vlname -sn- subname > show : Display subnet
eqcli vl- vlname -sn- subname > strike_count
integer
: Set the strike count threshold
for a subnet. When the number
of strikes detected on this
subnet exceeds this value, the
subnet has failed. A value of
0 indicates this subnet will
never be considered failed.
eqcli vl- vlname -sn- subname > virt_addr cidr_
addr
: Set the subnet Failover IP
address.
VLAN Subnet Flags
A flag may be turned off by prefixing with "!".
224 Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.