Removing IP Addresses from the Blacklist
The following format is used to remove previously configured IP addresses or categories from
blacklists.
eqcli >
no reputation {CIDR List|IP address}
To blacklist IP addresses using the GUI:
1. Select
System > Global > IP Reputation
on the left navigational pane.
2. Click on the
Modify Database
tab on the right. The following will be displayed:
3. Enter IP addresses in the Modify Blacklist text box and click on + to add them to the list
below.
l
You could enter individual IP addresses.
l
You could also enter a range of IP addresses to block. If, for example, you enter
10.0.0.5 - 10.0.0.11, all the addresses from 10.0.0.5 to 10.0.0.11 will be
blocked.
l
You can also enter a range of ip addresses using CIDR notation. If, for example,
you enter 192.168.100.0/22, this would encompass the 1024 addresses from
192.168.100.0 to 192.168.103.255.
4. Remove any of the addresses from the blacklist by selecting the IP addresses, or range of
IP addresses in the list and click on the trash icon.
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved.
259
Equalizer Administration Guide
Summary of Contents for Equalizer GX Series
