Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 301 / 866

Configuring Subnets
The following table describes how to perform subnet tasks using the CLI and the GUI:
Task Command / Procedure
Add a subnet
CLI eqcli
>
vlan name subnet name
[
parameters
]
GUI
1. Click on the System configuration tab on the left pane.
2. Click on the arrow ( u ) next to Network to expand the branch.
3. Click on the arrow ( u ) next to VLANs to expand the branch to
display all configured VLANs
4. Right-click a VLAN name
5. Select
Add Subnet from the pop up command menu.
6. Enter a Subnet Name , IP Address and Default Route in the
pop up window on the right.
7. Click
Commit .
Remove a subnet
CLI eqcli > no vlan name subnet name
GUI
1. Click on the System configuration tab on the left pane.
2. Click on the arrow ( u ) next to Network to expand the branch.
3. Click on the arrow ( u ) next to VLANs to expand the branch to
display all configured VLANs
4.Click on the arrow (
u
) next to a specific VLAN to expand the branch
to display all configured subnets .
5. Right-click the name of the subnet you want to delete.
6. Select
Delete Subnet from the popup command menu.
7. Click Confirm .
Modify a subnet
CLI
eqcli > vlan name subnet name [ parameters
]
GUI
1. Click on the System configuration tab on the left pane.
2. Click on the arrow ( u ) next to Network to expand the branch.
3. Click on the arrow ( u ) next to VLANs to expand the branch to
display all configured VLANs
4.Click on the arrow (
u ) next to a specific VLAN to expand the branch
to display all configured subnets .
4. Click the name of the subnet you want to modify. The configuration
displays appear in the right pane.
5. Edit the subnet configuration using the controls on each tab.
6. Click
Commit before navigating away to apply your changes.
Display summary of all
subnets in a VLAN
CLI
eqcli > show vlan name subnet
GUI N/A
Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.
All Rights Reserved. 301
Equalizer Administration Guide