Coyote Point Systems Equalizer GX Series, Administration Manual

Page: 846 / 866

Networking Translation Between EQ/OS 10.1.x and 10.2.x
EQ/OS 10.1.x
Configuration EQ/OS 10.2.x
Configuration What happens in an upgrade to
10.2.x
Network 1:
Default route
→
GW1
Destination network: 0/0
Network 1:
Static route: 0/0
→
GW1
This is a misconfiguration in the
10.1.x configuration because a
route has not been specified for
communicating with the destination
network, 192/24. Because of this,
in an upgrade, there is no way of
knowing which gateway to use for
the 192/24 route.
An error is logged.
Network 2:
Destination network: 192/24 Network 2:
No static routes created at upgrade
time
Network 1:
Default route
→
GW1
def_src_addr
Network 1:
Static route: 0/0
→
GW1
Any network with no destinations or
routes configured continues to
function the same way in 10.2.x
configuration.
Only Network 1 is connected to
outside networks, so it is the only
one converted. Network 2:
No destinations or routes Network 2:
No static routes
Network 1:
Default route
→
GW1
Destination network: 0/0
Network 1:
Static route: 0/0
→
GW1
This is a misconfiguration in 10.1.x
configuration, since there are no
configured destination networks
available from Network 2 and
Network 3. However, the intent of
the user is obvious, so the
networking is converted correctly
in an upgrade
An error is not logged.
Network 2:
Static route: 192/24
→
GW2
Network 2:
Static route: 192/24
→
GW2
Network 3:
Static route: 172/16
→
GW3
Network 3:
Static route: 172/16
→
GW3
Network 1:
Static route: 192/24
Destination network: 0/0 Network 1:
Static route: 192/24 This is a misconfiguration in 10.1.x
configuration, since the destination
network is wider than the routing
that is available. However, since the
intent is obvious, it is converted
correctly in an upgrade
Only systems reachable through
the static route will be reachable,
however, those were the only ones
that would be reachable in a 10.1.x
configuration.
An error is not logged.
Network 1:
Static route: 192/24
Destination network: 172/16 Network 1:
Static route: 192/24 This is a misconfiguration in 10.1.x
configuration since the destination
network does not match the routing
that is available. The resulting
configuration is the same as
ignoring the destination network.
Only systems reachable through
the static route will be accessed.
An error is logged.
846 Copyright © 2014 Coyote Point Systems, A Subsidiary of Fortinet, Inc.