Cognex In-Sight 1721, User Manual

Page: 115 / 156

In-Sight
®
1700 Series Wafer Reader Section 8: Specifications
105
Table 8-3: In-Sight 1700 Wafer Reader General Specifications
SPECIFICATION DESCRIPTION
Configurations
•
Vertical Mount (P/N 800-5748-10)
•
Horizontal Mount (P/N 800-5748-20)
Firmware
In-Sight version 2.13 – In-Sight version 2.70
Supported Wafer Marks
Standards
SEMI font SEMI M12, M13, M1.15
IBM font N/A OCR
Triple font N/A
2D Data Matrix™ (ECC 200, 8 x 32) SEMI T7 and M1.15
Reading Capability
Barcode BC 412 and IBM 412 SEMI T1-95
Job/Program 4MB non-volatile flash memory; Unlimited storage via remote network device Memory
Image/Processing 16MB SDRAM
Image Sensor 1/3-inch CCD
Optical Properties 6mm diagonal, 7.4 x 7.4 µ m sq. pixels
Resolution (pixels) 640 x 480
Electronic Shutter
Speed
64 µ s to 33ms; Up to 30 frames per second
Rapid reset, progressive scan (supports partial scan), full-frame integration
256 gray levels (8 bits/pixel)
Acquisition
Gain controlled by software
Lighting/Optics
Working Distance: 10mm (Vertical); 15mm (Horizontal)
Depth of focus:
±
3mm
Illumination Area: 25mm (W) x 10mm (H) (Nominal; depends on Light Mode)
Red LEDs, 626nm wavelength, w/ Bright Field and Dark Field modes
Variable intensity controlled through software
I/O Trigger 1 opto-isolated, acquisition trigger input
Remote software commands via Ethernet and RS-232
None built-in
Discrete Inputs
Unlimited inputs when using an Ethernet I/O system.
None built-in
Discrete Outputs
Unlimited outputs when using an Ethernet I/O system.
Status LEDs 1 Network Traffic, 1 Network Status, 1 Network Speed, 2 User-Configurable
Network
1 Ethernet port, 10/100 BaseT, TCP/IP protocol. Supports DHCP (factory default) or
static IP address.
Serial 1 RS-232C port (1200 to 115,200 baud rates)
Communications
Protocols In-Sight, Native Mode and Electroglas
Power 24 ±10% VDC; 125mA (illumination off) to 200mA (illumination on)
Material Aluminum housing, black anodized
Mounting
Four 6.5mm deep M4 threaded mounting holes (two per side)
Maximum torque 1.5 N-m (13.5 in-lb)
Dimensions 116.7mm (4.55in) x 69.9mm (2.75in) x 54.9mm (2.16in)
Mechanical
Weight 416.7 g (14.7 oz)
Temperature 10 to 45°C (Operating), -10 to 65°C (Storage) Environmental
Humidity 10 to 90%, non-condensing (Operating and Storage)
Certifications CE, UL, CUL, FCC