Cognex In-Sight 1721, User Manual

Page: 90 / 156

Section 7: Native Mode Commands In-Sight
®
1700 Series Wafer Reader
80
Sample Input and Output
EV GETCONFIG(A4,0)
1
470
<Config Id="0">
<Mark>4</Mark>
<Checksum>2</Checksum>
<LightMode>1</LightMode>
<LightPower>2</LightPower>
<Orientation>0</Orientation>
<Region>
<Row>280</Row>
<Col>45</Col>
<High>100</High>
<Wide>500</Wide>
<Theta>0</Theta>
<Phi>0</Phi>
</Region>
<CharSize>
<High>42</High>
<Wide>22</Wide>
</CharSize>
<CharSpacing>1</CharSpacing>
<FieldString>**********CS</FieldString>
<FieldDef></FieldDef>
<Color>2</Color>
<Accept>50</Accept>
<Enable>1</Enable>
<Retry>0</Retry>
<BComp>0</BComp>
<Thresh>25</Thresh>
<Optimization>0<Optimization>
</Config>
Other EV GetConfig Commands
EV GetConfigMark(<WafID>,<Config>)
EV GetConfigChecksum(<WafID>,<Config>)
EV GetConfigLightMode(<WafID>,<Config>)
EV GetConfigLightPower(<WafID>,<Config>)
EV GetConfigOrientation(<WafID>,<Config>)
EV GetConfigRegionRow(<WafID>,<Config>)
EV GetConfigRegionCol(<WafID>,<Config>)
EV GetConfigRegionHigh(<WafID>,<Config>)
EV GetConfigRegionWide(<WafID>,<Config>)
EV GetConfigRegionTheta(<WafID>,<Config>)
EV GetConfigRegionPhi(<WafID>,<Config>)
EV GetConfigCharHigh(<WafID>,<Config>)
EV GetConfigCharWide(<WafID>,<Config>)
EV GetConfigFieldStr(<WafID>,<Config>)
EV GetConfigFieldDef(<WafID>,<Config>)
EV GetConfigColor(<WafID>,<Config>)
EV GetConfigAccept(<WafID>,<Config>)
EV GetConfigEnable(<WafID>,<Config>)