Cognex In-Sight 1721, User Manual

Page: 22 / 156

Section 2: Installing the Wafer Reader In-Sight
®
1700 Series Wafer Reader
12
2.4.2 Installing to a Non-DHCP Network
A static IP address must be assigned to the wafer reader before the wafer reader will be
recognized on a network where a DHCP server is not available.
To Install the In-Sight Wafer Reader on a Non-DHCP Network:
1 Supply power to a wafer reader, then open the In-Sight PC Host program.
2 From the In-Sight spreadsheet, press < ESC > to open the System menu.
Figure 2-6: PC Host System Menu
3 Select Logon to open the Logon dialog.
Figure 2-7: PC Host Logon Dialog
4 Click on the Host Name drop-down list to see the names of any In-Sight sensors
already installed on the network.