Cognex In-Sight 1721, User Manual

Page: 63 / 156

6 System Settings
In this section…
6.1 About System Settings ............................................................................................53
6.2 Version Information..................................................................................................54
6.3 Configuring Network Settings ..................................................................................54
6.4 Configuring Serial Port Settings...............................................................................58
6.5 Managing the User List............................................................................................60
6.6 Startup Options........................................................................................................60
6.1 About System Settings
Each wafer reader has its own system settings that control the wafer reader’s networking
configuration and serial port settings, the list of authorized users, and the startup
behavior. These settings are stored in the wafer reader’s PROC.SET file, and apply to all
jobs.
To access a wafer reader’s System Settings from the browser interface:
1 Click on the Options tab.
2 In the Options tab, click on the System hyperlink in the upper-right corner.
NOTE System Settings may also be configured using the In-Sight PC Host.
53