Cognex In-Sight 1721, User Manual

Page: 52 / 156

Section 3: Configuring a Wafer ID Application In-Sight
®
1700 Series Wafer Reader
42
An example of the outputs using the In-Sight protocol commands from Microsoft
Windows' built-in Telnet client are shown in Figure 3-13.
Figure 3-13: In-Sight Protocol Output Example
EG (Electroglas) Protocol
Protocol for use with an Electroglas, Inc. wafer prober. This protocol can be used with
either a TCP/IP or RS-232 connection.
COMMAND DESCRIPTION OUTPUTS
ESC-y1wXON Reads all enabled Configs. This command uses
the Read Order selected in the Options tab.
Note : “ESC” and “XON” are control characters.
The Output String will be either a character
string for a successful read or a string of
asterisks for a failed read. Partial reads are
not returned, since any return other than a
string of asterisks will be interpreted by the
wafer prober as a successful read. The
number of asterisks returned will be the
same as the number of characters specified
in the Field String (see Section 3.5.6: Field
String and Field Definition).
An example of the outputs using the EG protocol commands from Microsoft Windows'
built-in Telnet client are shown in Figure 3-14. The first Read command (entered as a
sequence of ASCII characters) shows the output for a successful read; the second Read
command shows the output for a failed read.
Figure 3-14: EG Protocol Output Example