Cognex In-Sight 1721, User Manual

Page: 89 / 156

In-Sight
®
1700 Series Wafer Reader Section 7: Native Mode Commands
79
7.4.6 EV ResetStats
EV ResetStats(<WafID>)
Reset all accumulated read statistics.
Inputs : WafID
Outputs : Status Code, # of bytes
EV RESETSTATS(A4)
1
0
7.5 Evaluate Extended Native Mode Commands
(Get)
The following commands are used in conjunction with the Evaluate (EV) extended Native
Mode command to retrieve settings and read results from the Configs in a wafer ID job.
Each command returns a Status Code, the number of characters (in bytes, including
Carriage Returns and Line Feeds) in the output that follows, and the results in XML
format.
Syntax : EV [command]
The status codes for all Evaluate commands are:
STATUS CODE DESCRIPTION
1 The command was executed successfully.
0 Unrecognized command.
–2 The command could not be executed.
7.5.1 EV GetConfig
EV GetConfig(<WafID>,<Config>)
Returns the current settings for a Config.
Inputs : WafID, Config
Outputs : Status Code, # of bytes, Mark, Checksum, LightMode, LightPower, Orientation,
Row (Region), Column (Region), High (Region), Wide (Region), Theta (Region), Phi
(Region), High (CharSize), Wide (CharSize), CharSpacing, FieldString, FieldDef, Color,
Accept, Enable, Retry, BComp, Thresh, Optimization