Cognex In-Sight 1721, User Manual

Page: 68 / 156

Section 6: System Settings In-Sight
®
1700 Series Wafer Reader
58
Host Table
This button opens the Host Table dialog to specify a local mapping of network Host
Names to IP addresses. Host Table dialog controls include:
Favor Host Table over DNS : When enabled, this checkbox specifies that the
search order for In-Sight Host Names will be the host table, followed by the
network browser, then DNS. When disabled, the Host Name search order is the
network browser, followed by DNS, and then the host table.
Host Name : The name of the networked In-Sight wafer reader to map (or assign)
to the specified IP address. The Host Name entered will appear in any list of Host
Names throughout the In-Sight interface.
IP Address : The IP address of the networked In-Sight wafer reader to map to the
specified Host Name.
6.4 Configuring Serial Port Settings
The Serial tab (Figure 6-3) configures the wafer reader’s RS-232 serial port
communications.
Figure 6-3: Serial Tab
Baud Rate
300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, or 115200 (default).
Data Bits
7 or 8 (default).
Stop Bits
1 (default) or 2.
Parity
None (default), Even, or Odd.