Cognex In-Sight 1721, User Manual

Page: 105 / 156

In-Sight
®
1700 Series Wafer Reader Section 7: Native Mode Commands
95
7.6.9 EV SetConfigColor
EV SetConfigColor(<WafID>,<Config>,<Color>)
Sets the expected color of the wafer mark.
Inputs : WafID, Config, Color
Outputs : Status Code, # of bytes
Sample Input and Output
EV SETCONFIGCOLOR(A4,0,1)
1
0
7.6.10 EV SetConfigEnable
EV SetConfigEnable(<WafID>,<Config>,<Enable>)
Specifies whether a Config is enabled or disabled, which determines if the specified
Config will be used during the retry sequence at runtime.
Inputs : WafID, Config, Enable
Outputs : Status Code, # of bytes
Sample Input and Output
EV SETCONFIGENABLE(A4,0,1)
1
0
7.6.11 EV SetConfigFieldDef
EV SetConfigFieldDef(<WafID>,<Config>,<”FieldDef”>)
Defines the Field String when Mark specifies a character string or barcode.
NOTE The FieldDef input must be set off with quotation marks.
Inputs : WafID, Config, FieldDef
Outputs : Status Code, # of bytes
Sample Input and Output
EV SETCONFIGFIELDDEF(A4,0,"A=A;B=B")
1
0